| Optical data | Typical Value | Remarks |
| Light source | LED | |
| Peak wave length of blue LED | 415 nm | For blue LED |
| CCT of white light | 5750±550K | White LED after 1m, NA0.62,Φ5mm optical fiber |
| CRI of whith light | ≥90 | White LED after 1m, NA0.62,Φ5mm optical fiber |
| CCT of white+blue light | 6300±550K | White + blue LED after 1m, NA0.62,Φ5mm optical fiber |
| CRI of white+blue light | ≥90 | White + blue LED after 1m, NA0.62,Φ5mm optical fiber |
| Blue/Green ratio | 120% / 112% | White+Blue/white only |
| Red/Green ratio | 78% / 72% | White+Blue/white only |
| IR cut-off performance | 4.3 mW/lm | White + blue LED |
| Output luminous flux of white light | 990 lm | Luminous flux input for NA=0.62,Φ5mm optical fiber |
| Output power of 415 nm | 1600 mW ± 20% | Power input for NA=0.62,Φ5mm optical fiber |
| Back focal length | 23.6 mm | From the last lens vertex |
| Electrical data | ||
| Input voltage | DC 12V | Can be customized according to customer requirement |
| Power consumption | 35 W | Driver board consumption included |
| Initial power | 45 W | Minimum power output |
| Dimming mode | PWM/POT/RS232/Key/Touch | Can be customized according to customer requirement |
Rayfine Specialty light is focusing on LED light source for medical equipment. We have passed ISO13485 and ISO9001. Our major product lines as below:
Endoscopic LED light module, to replace Xenon lamp
ICG-NIR fluorescence imaging light source
NBI Light module
Dental lamp and module
Microscope light module
Surgical light module
UV sterilization module
Key parameter for LED Endoscope NBI Light Module
· White light +415nm+540nm+605nm LED
· White light Ra>90
· White light CCT=5700±500K
· Luminous flux of white light is1050lm
· Output power of 415nm is 2250mW
· Output lumen of 540nm is 310lm
· Output lumen of 605nm is 240lm
· Back focus length 23.6m