| Optical data | Typical Value | Remarks |
| Light source | White LED + 785 nm laser | |
| Peak wave length of laser | 785 nm | FWHM=3 nm |
| CCT of white light | 5500±500K | White LED after 1m, NA0.62,Φ5mm optical fiber |
| CRI of whith light | ≥90 | White LED after 1m, NA0.62,Φ5mm optical fiber |
| Output luminous flux of white light | 2400 lm | After module,spot size at focal plane 4.5x5.5mm |
| 2100 lm | With Rayfine adaptor,flux input for NA=0.62,Φ5mm optical fiber | |
| Output power of 785 nm | 4200mW | After module,flux input for NA=0.62,Φ5mm optical fiber |
| 3900mW | With Rayfine adaptor,flux input for NA=0.62,Φ5mm optical fiber | |
| Back focal length | 23.6 mm | From the last lens vertex |
| Electrical data | ||
| Input voltage | DC 12V | Can be customized according to customer requirement |
| Power consumption | 130 W | Driver board consumption included |
| Initial power | 156 W | Minimum power output |
| Dimming mode | RS232 | 5%~100% |
Key parameter for ICG-NIR fluorescence FOI module as below
· Light source: White light + 785nm laser
· Peak wavelength:785nm
· Light source White light: Ra>90
· White light CCT=5700±500K
· Luminous flux of white light 2300lm
· Luminous flux of white light for Φ5mm light guide: 2600lm (NA=0.62)
· Output power of 785nm laser=3500mW
· Back focus length 23.6mm
· Input voltage: DC12V for LED white light
· Input power:90W including driver
· Dimming of white light: Min:10%; Max:100%; By RS232 condition
· Dimming of laser: Min:0; Max:100%; By RS232 condition